Lifthydrau 10 kW Three-Phase Servo Pump Unit

Product Overview

The AC Voltage field lists 208-230, 240, 380, 460, and 480 V. Frequency is recorded as 220 Hz, an unusual value requiring verification. A broader Power field states 8.3-282 kW, while the title and Rated Power field specify 10 kW. Order documents should lock the required 10 kW configuration and matching electrical data.

Other entries include displacement of 32-125, weight of 100 kg, dimensions or volume of 1100 x 400 x 400, a three-month warranty, and application to industry machines. The MOQ is one set. Published package data shows 100 x 100 x 100 cm and 50 kg gross weight, which conflicts with the listed product weight.

Technical Specifications

Key Features

• 10 kW Rated Power: The Rated Power field and product title both identify 10 kW. This is the clearest power reference for this page, while the separate 8.3-282 kW Power entry indicates a wider listed range. Request exact motor and pump data for the quoted assembly.
• Three-Phase Voltage Options: The source specifies three-phase service and lists 208-230, 240, 380, 460, and 480 V. These entries support preliminary electrical screening. Final compatibility depends on winding, drive, controls, and verified frequency, so the order should state one approved voltage rather than the complete list.
• 1500 RPM Rated Speed: Rated speed is published as 1500 RPM. Buyers can use it when requesting pump selection and expected hydraulic output. Speed alone does not establish flow, pressure, or duty capability; those values require the displacement unit, system conditions, and approved performance information.
• IE3 and Drip-Proof Attributes: IE3 is the listed efficiency classification and drip-proof is the stated protection feature. These are source attributes, not third-party certification claims. Confirm the motor nameplate, test basis, enclosure details, installation orientation, and environmental limits for the offered configuration.
• Foot-Mounted Servo Motor: The listed type is servo motor and the mounting type is foot mount. The source gives no hole pattern, shaft details, or foundation requirements. Request a drawing showing mounting centers, coupling arrangement, ports, service clearances, and the assembled footprint.
• One-Set Procurement: The MOQ is one set, allowing sourcing for an individual machine or evaluation. No public price is supplied. Obtain a configuration-specific quotation covering the motor-pump assembly, included controls and accessories, packing, lead time, warranty scope, and delivery terms.

Applications

The source names industry machines as the application. Suitability depends on matching the motor, pump, electrical supply, hydraulic circuit, and duty cycle; these are evaluation contexts rather than guaranteed capabilities.

• Industrial machine projects requiring a three-phase servo pump unit with confirmed 10 kW power and 1500 RPM speed.
• Retrofits where a foot-mounted motor layout can be checked against foundation, shaft, coupling, and clearance requirements.
• Plant installations evaluating a listed voltage after winding, drive, control, and frequency compatibility are documented.
• Hydraulic systems reviewing the 32-125 displacement entry after its missing unit and output data are confirmed.
• One-machine trials or replacement purchases supported by the listed one-set minimum order.

Selection Guide

Define the operating point before comparing hardware. Supply required flow, normal and peak pressure, cycle profile, fluid, temperature, reservoir details, filtration, cooling, noise limit, and expected running hours. Request performance data connecting these needs to the selected displacement, 1500 RPM speed, and 10 kW motor.

Verify site integration separately. Confirm one voltage, actual frequency, phase, drive and control architecture, feedback needs, enclosure suitability, foot-mount dimensions, shaft and coupling, hydraulic ports, overall size, and maintenance access. Treat 220 Hz as requiring written confirmation, not as a default supply assumption.

Ordering Information

Reference product ID 10000043776549 and specify quantity, 10 kW rated power, selected voltage, verified frequency, 1500 RPM requirement, displacement and unit, pressure, flow, controls, mounting interfaces, and destination. Request an approved drawing, data sheet, and nameplate information. Reconcile the listed 100 kg product weight with the 50 kg single gross weight. Confirm warranty, package contents, lead time, packing, and trade terms.

Frequently Asked Questions

Q: What are the main rated values for this servo pump unit?

A: The source lists 10 kW rated power, 1500 RPM rated speed, and three-phase operation. Request corresponding pump data because motor ratings alone do not define hydraulic output.

Q: Which AC voltages are listed?

A: The voltage field records 208-230, 240, 380, 460, and 480 V. Treat these as options, not simultaneous inputs. State the project supply and confirm the exact motor, drive, and controls.

Q: Is the motor IE3 and foot mounted?

A: Yes. IE3 efficiency and foot mounting are stated, while protection is listed as drip-proof. Request nameplate data, enclosure details, mounting dimensions, and applicable efficiency documentation for the offered unit.

Q: What is the listed frequency?

A: The source records 220 Hz. Because this is unusual, obtain written confirmation of the actual rated frequency and verify compatibility with the site supply and selected drive.

Q: What are the MOQ and warranty period?

A: The MOQ is one set and the warranty is three months. Ask the quotation to define coverage, exclusions, start date, included components, packing, lead time, and delivery terms.