01174513 Hydraulic Single Gear Pump, 4-25 cc, 200 Bar

Product Overview

Published hydraulic and drive data includes operating pressure of 200 bar, pressure information of 200 bar, speed of not stated, maximum horsepower of as required, and power of not stated. These entries are reproduced as source facts and should not be extended beyond the stated configuration.

The catalog supports preliminary sourcing rather than final machine approval. Engineering guidance: verify exact displacement, rotation, shaft, mounting, ports, input speed, continuous pressure, peak pressure, fluid, temperature, inlet conditions, and duty cycle for the intended system.

Technical Specifications

Key Features

• Product identity and positioning: The source identifies 01174513 as a hydraulic single gear pump with one stage, 4-25 cc displacement, and 200 bar operating pressure. It does not name an equipment type.
• Displacement for configuration review: The published displacement is 4-25cc. The source does not provide a complete option matrix or a performance curve. Engineering guidance: state the exact required displacement and unit on the request, quotation, drawing, and purchase order.
• Pressure data to reconcile: Operating pressure is listed as 200 bar; another pressure-related entry is 200 bar, while the maximum-pressure or related value is not separately stated. Ask the supplier to distinguish continuous, intermittent, and peak limits for the exact ordered build rather than combining these fields.
• Drive, stage, and connection facts: The source gives 1 Stage, speed of not stated, maximum horsepower of as required, power of not stated, and connection size of as required. Engineering guidance: confirm rotation, shaft form, mounting flange, thread standard, port orientation, and available drive power because the listing does not fully define them.
• Dimensions and customizable details: Structure or pressure customization appears in the source where stated, but its scope is not defined. Request a dimensioned drawing and a configuration code that freezes every approved interface before treating the pump as interchangeable.
• MOQ, warranty, and packaging: The minimum order is 2 pieces, and each selling unit is one item. The listed single package is 12X12X10 cm with 4.500 kg gross weight. Warranty is 1 Year; OEM support is not stated. Request current commercial terms because no price is present in the source record.

Applications

The source positioning supports preliminary evaluation for 01174513 single-pump replacement. The following are screening scenarios, not guarantees of fit, flow, pressure capability, or service life.

• Replacement sourcing against a confirmed 01174513 part reference
• Single-pump circuit requiring a selected 4-25 cc option
• One-stage equipment build reviewed for 200 bar operation
• Custom-interface inquiry with buyer-defined connection details
• Maintenance trial ordered at or above the two-piece minimum

Selection Guide

Engineering guidance: start with the removed pump and machine data. Record product code, machine model, displacement, rotation viewed from the drive end, shaft geometry, mounting pilot, bolt pattern, port thread, port location, normal pressure, peak pressure, actual speed, fluid, temperature, filtration, and duty cycle. Compare every point with an approved supplier drawing.

Use 01174513 as the search reference, then establish the full configuration. Connection size and maximum horsepower both say as required, making buyer-supplied interface and drive information essential. Also ask the supplier to identify any ambiguous source field and place the resolved value in the quotation. A qualified hydraulic reviewer should approve the match before purchasing or installation.

Ordering Information

Request 01174513 for 01174513 single-pump replacement and specify quantity, exact displacement, input-speed range, normal and peak pressure, fluid, rotation, shaft, mounting, ports, connection standard, and any OEM or packaging needs. The source MOQ is 2 pieces. Engineering guidance: require written confirmation of the ordered configuration, dimensional drawing, rating basis, and warranty terms before releasing the purchase order. Use receiving inspection to compare model marking, shaft, ports, package contents, and documentation with the approved record.

Frequently Asked Questions

Q: What displacement is listed for 01174513?

A: The source gives 4-25cc. Engineering guidance: confirm the exact option, unit, and availability for the quoted configuration before using it in flow calculations.

Q: What pressure information does the source provide?

A: The catalog lists operating pressure of 200 bar and also shows 200 bar. Because fields may describe different conditions, request continuous and peak ratings for the exact build.

Q: What drive and connection data is available?

A: The source lists speed as not stated, maximum horsepower as as required, power as not stated, and connection size as as required. Shaft, rotation, flange, thread form, and port layout still require confirmation.

Q: Does the listing establish direct machine compatibility?

A: No. It positions the pump for 01174513 single-pump replacement, but it does not provide a complete fitment list. Engineering guidance: match the existing unit and machine interfaces by drawing.

Q: What are the order and package details?

A: MOQ is 2 pieces. One item is the selling unit, with a listed package of 12X12X10 cm and gross weight of 4.500 kg. Warranty is 1 Year, and OEM support is not stated.