DC 12V 24V 48V Aluminum Hydraulic Power Pack

Product Overview

Source values include 0.75-1.5 kW power, customizable pressure with 7 MPa stated, 1400 RPM speed and a 6L tank. These attributes frame an inquiry around electrical supply, clamping demand and reservoir capacity. As no flow rate is provided, required cylinder speed should be translated into a flow requirement during engineering review.

The product is sold as a single item with a one-set minimum. A six-month warranty appears in this product's attributes. Buyers should nominate one voltage and the intended operating values, then confirm that the final power pack configuration matches the machine and control system.

Technical Specifications

Key Features

• Three DC Voltage Options: The title lists DC 12V, 24V and 48V versions, giving designers documented supply choices. Select one voltage matching the machine's electrical system, and verify current demand, switching, cable sizing and protection during installation engineering rather than treating the options as interchangeable.
• Aluminum Alloy Material: Aluminum alloy is the material identified in the source attributes. That stated construction distinguishes this listing from the stainless steel HPU variants in the same catalog. Buyers who require a particular alloy grade, surface condition or environmental suitability should request those details, because no grade or environmental classification is supplied in the source record.
• Machine-Tool Clamping Application: The recorded application is a clamping cylinder for a machine tool. This makes the unit relevant to inquiries involving hydraulic clamping, where required force, approach speed and holding behavior define the circuit. General engineering guidance is to calculate pressure from cylinder area and needed force, then check the proposed configuration accordingly.
• 0.75-1.5 kW Range: Power is listed from 0.75 to 1.5 kW. This allows the requested version to be discussed within a limited documented range. The correct motor rating depends on pressure, flow, efficiency and operating duty; submit those inputs so selection is based on the clamping cycle rather than only on the higher power figure.
• Customizable 7 MPa Pressure: The pressure attribute states customizable and identifies 7 MPa. Buyers should specify the desired working pressure and any relief setting instead of assuming a universal preset. For clamping equipment, also define whether pressure must be maintained and how the clamp should release, since those control details are not described in the catalog record.
• 6L Tank and 1400 RPM: A 6L tank and 1400 RPM speed are both stated for this hydraulic power pack. These fixed listing values provide useful checkpoints when reviewing the offer. Reservoir volume should be compared with cylinder displacement and heat conditions, while speed must be considered alongside pump displacement to establish the required hydraulic flow.

Applications

The strongest source-grounded use is machine-tool clamping, while the voltage and listed configuration support several closely related sourcing descriptions. Final integration should follow the equipment's hydraulic and electrical design:

• Machine-tool clamping cylinder power
• 12V DC hydraulic clamping systems
• 24V DC machine hydraulic packs
• 48V DC industrial power-pack projects
• Custom 7 MPa hydraulic unit inquiries

Selection Guide

Choose the DC voltage first by matching the existing machine supply: 12V, 24V or 48V as listed in the title. Then calculate the pressure needed to achieve clamping force and the flow needed for the desired approach and release times. Compare the result with the 7 MPa listed pressure, 0.75-1.5 kW power and 1400 RPM speed before requesting a final selection.

Review the 6L tank against total cylinder displacement, fluid return and expected duty. General engineering guidance is to define control sequence, pressure-holding behavior, electrical protection and available installation space before approval. If material requirements go beyond the listed aluminum alloy description, put the exact grade or finish request in the inquiry and wait for written confirmation rather than assuming availability.

Ordering Information

One set is the recorded MOQ and each pack is sold as a single item. Send the chosen DC voltage, target working pressure, required flow or cycle time, motor power preference, 6L tank requirement and clamping sequence with the request. This product lists a six-month warranty; confirm the applicable terms and the complete agreed configuration in the order documentation.

Frequently Asked Questions

Q: Which DC voltages are offered in the title?

A: The product title lists 12V, 24V and 48V DC options. The buyer should select one voltage that matches the intended machine supply.

Q: What is the listed application?

A: The source specifies the clamping cylinder of a machine tool as the application for this hydraulic power pack.

Q: What material is identified?

A: Aluminum alloy is stated in the attributes. The source does not provide a specific alloy grade or surface-finish specification.

Q: What are the main operating values?

A: The listing states 0.75-1.5 kW power, customizable pressure with 7 MPa identified, 1400 RPM speed and a 6L tank.

Q: Can buyers order one unit?

A: Yes. The MOQ is one set and the selling unit is a single item. This product also states a six-month warranty.