12V DC Hydraulic Power Unit for Pallet Stackers

Product Overview

The listing records a broad 0.1-10 kW power range, customizable pressure from 5 to 32 MPa, speed from 1000 to 3600 RPM and tank capacity from 1 to 50 liters. These are configuration ranges rather than a single ready-made operating point. The actual combination should be selected around lifting force, travel speed, duty cycle, battery system and available mounting space.

The selling unit is one item with a one-set minimum. A six-month warranty is stated. Because pump displacement, flow, dimensions and a hydraulic schematic are not provided, buyers should include calculations and interface requirements in the inquiry and obtain configuration confirmation before ordering.

Technical Specifications

Key Features

• 12V DC Power Pack: The product title identifies a 12V DC hydraulic power unit. This is relevant to mobile equipment using a compatible low-voltage electrical system. Buyers should verify battery voltage under load, current demand, cable sizing, switching and circuit protection as general engineering steps before connecting the selected motor and hydraulic assembly.
• Stacker and Forklift Use: Electric pallet stackers and hydraulic forklift trucks are the applications named in the title. The listing can therefore support sourcing conversations for hydraulic functions on this equipment. Required load, cylinder geometry, lifting height, movement time and operating frequency should be provided so a configuration can be assessed for the specific machine.
• Stainless Steel Material: The source attributes specify stainless steel material. This is a documented construction detail, but the record does not name a stainless grade or environmental performance level. If the operating environment imposes specific corrosion, washdown or material requirements, buyers should state the requirement and request confirmation for the offered configuration.
• 5-32 MPa Pressure Range: Pressure is listed as customizable from 5 to 32 MPa. The selected working pressure should follow the force required from the actuator and the design limits of the complete circuit. General guidance is to identify normal pressure, relief setting and any peak condition separately when preparing technical data for review.
• 0.1-10 kW Power Range: The recorded motor power spans 0.1-10 kW, offering a wide selection range for discussion. A larger motor is not automatically the correct choice. Match motor power to required hydraulic pressure and flow, expected duty and electrical supply capability, then document the chosen value as part of the final unit specification.
• Configurable Tank and Speed: The listing states 1-50L tank capacity and 1000-3600 RPM speed. These ranges allow the reservoir and rotating-speed requirement to be discussed around the equipment. Buyers should submit cylinder displacement, desired cycle time and space constraints, because the source does not define which tank and speed combinations are paired in available builds.

Applications

The product title directly associates this 12V unit with material-handling equipment. Appropriate source-grounded application descriptions include lifting-system and power-pack projects for the named vehicle types:

• Electric pallet stacker hydraulic systems
• Hydraulic forklift truck power packs
• 12V DC material-handling equipment
• Custom-pressure mobile hydraulic lifting circuits

Selection Guide

Start with the required lifting force and calculate circuit pressure from the selected cylinder geometry. Establish target lifting and lowering times to define flow, then assess motor power within the listed 0.1-10 kW range. The chosen pressure must remain within the stated customizable 5-32 MPa range, while the 12V electrical system must be checked for the resulting current demand and duty.

Next, compare the required oil volume and installation envelope with the listed 1-50L tank range, and consider speed within 1000-3600 RPM together with pump displacement. General engineering guidance is to review heat, suction conditions, electrical protection and emergency behavior for the complete machine. Request drawings and a circuit proposal when dimensions, ports or controls are decision-critical because those details are not in the source.

Ordering Information

The recorded MOQ is one set and packaging is described as a single-item selling unit. Include equipment type, 12V supply details, load, cylinder data, operating pressure, flow or cycle target, desired power, speed and tank capacity with the inquiry. The source states a six-month warranty for this product; obtain the related terms with the confirmed unit specification.

Frequently Asked Questions

Q: Is this unit listed for pallet stackers?

A: Yes. The product title names an electric pallet stacker and hydraulic forklift truck as intended equipment contexts.

Q: What voltage is stated?

A: The title specifies 12V DC. Buyers should verify that the selected configuration is compatible with the equipment's battery and electrical controls.

Q: How much pressure can be selected?

A: The source lists customizable pressure from 5 to 32 MPa. The appropriate setting depends on the actuator, load and complete circuit design.

Q: What tank sizes are listed?

A: Tank capacity is stated from 1 to 50 liters. The final capacity should be selected against oil-volume, thermal and installation requirements.

Q: What is the minimum order quantity?

A: The MOQ is one set, sold as a single item. This exact product also lists a six-month warranty.