Customized 1 Ton Reentry Digital Hydraulic Cylinder

Product Overview

Published drivetrain values include 0.4 kW motor power, 3000 rpm motor speed, a 10 mm lead and 100 mm/sec rated speed. The listed core components are PLC, engine, bearing, gearbox, motor, pressure vessel and gear. These are the available catalog facts for initial technical screening.

The 1 ton wording comes from the source title, but the record does not define whether it represents rated load, maximum load, thrust or another measure. It also provides no test condition. Buyers should request a precise definition and configuration-specific evidence before using that wording in an engineering calculation.

Technical Specifications

Key Features

• Source-Stated 1 Ton Description: The title presents the cylinder as 1 ton. Because no corresponding load field, force value or rating method is supplied, this page does not reinterpret that statement. Engineering approval should depend on a confirmed definition, applicable direction, operating conditions and documented safety factors for the proposed configuration.
• Reentry Design: Reentry is part of the product's source description and may be relevant when discussing the mechanical arrangement. It does not establish the installed length, stroke or mounting envelope. Buyers should request dimensional drawings and verify clearance through the complete movement before freezing the machine layout.
• High Rigidity Positioning: The source title highlights high rigidity together with high precision and fast response. No stiffness, deflection, accuracy or response-time figures are given. These characteristics should therefore be translated into measurable, project-specific acceptance criteria during technical review rather than treated as universal numerical performance.
• Low-Noise Description: Low noise is an explicitly listed product characteristic. The source does not state a decibel value, distance or operating condition. As selection guidance, assess noise expectations for the full mechanism and define a suitable measurement method if sound performance is important to acceptance.
• Stainless Steel Body: Stainless steel is listed as the body material. This is a useful fact for material and construction review, but it should not be treated as proof of a particular ingress-protection or corrosion rating. No IP rating or environmental certification appears in the source data.
• Documented Inspection Availability: The source marks the machinery test report and video outgoing inspection as provided. Procurement teams can request both for the ordered configuration and agree how the unit will be identified in those records. The exact tests and acceptance limits still need to be defined.

Applications

These potential application categories are guidance only. Suitability must be established from a verified load definition, travel, duty, mounting, controls and environmental conditions for the final cylinder configuration.

• Industrial lifting or pressing concepts after the meaning and conditions of the 1 ton statement are verified.
• Automated machinery requiring linear movement with a reentry-style arrangement confirmed by drawings.
• Positioning modules where high rigidity and precision expectations can be converted into measurable criteria.
• Equipment designs that include a stainless steel body in their documented material requirements.
• Machine projects requiring outgoing-inspection video and a machinery test report as procurement records.

Selection Guide

As general guidance, first define required force in each direction, stroke, speed profile, duty cycle, mounting, side-load limits and safety factor. Ask the supplier to explain the 1 ton designation and provide configuration-specific rating conditions. Do not assume that the title alone establishes usable force.

Then review the 0.4 kW motor, 3000 rpm speed, 10 mm lead and 100 mm/sec rated speed against the machine cycle and controls. Confirm dimensions, electrical and hydraulic interfaces, feedback, environmental protection and acceptance testing because these details are not fully specified in the source.

Ordering Information

The minimum order quantity is one set, with single-item selling units. The listed package size is 14 x 14 x 18 cm and gross weight is 30.000 kg, while product weight is stated as 50 kg. Clarify weight, final drawings, 1 ton definition, inspection documents, customization and warranty scope before purchase.

Frequently Asked Questions

Q: What does the 1 ton description mean?

A: The source title says 1 ton but does not define the rating type or conditions. Request a written definition and supporting data for the offered configuration.

Q: Is numerical precision stated?

A: No. High precision appears in the title, but no accuracy, tolerance or repeatability value is provided. Confirm measurable criteria before selection.

Q: Which motion values are available?

A: The source lists a 10 mm lead, 0.4 kW motor, 3000 rpm motor speed and 100 mm/sec rated speed.

Q: Is this cylinder listed as customizable?

A: Yes, customized appears in the source title. The precise customization scope is not defined and should be documented in drawings and order specifications.

Q: What inspection items are provided?

A: A video outgoing inspection and machinery test report are marked as provided. Agree their scope, test criteria and configuration reference during order review.