Vehicle Tail Lift Hydraulic Power Unit with Valve Block

Product Overview

The source lists 0.75-1.5 kW power, customizable pressure with 7 MPa stated, 1400 RPM speed and a 6L tank. These values support technical discussion without assuming an unlisted flow rate, port arrangement or valve sequence. The application attribute also references a machine-tool clamping cylinder, so the intended circuit should be explicit during inquiry.

Each unit is sold as a single item with a one-set minimum. A six-month warranty is stated. Buyers should reconcile the tail-lift title with the clamping-cylinder application and request a configuration matching the actual equipment, controls and load requirements.

Technical Specifications

Key Features

• Tail-Lift Product Positioning: The title positions this hydraulic power unit for vehicle tail lifts and truck rear loading platforms. That makes it a sourcing candidate for a tail-lift project. It does not replace system calculations: buyers should provide platform load, cylinder dimensions, required movement time and operating frequency for an application-specific review.
• Integrated Valve Block: An integrated valve block is explicitly included in the product title. Integration can simplify how a buyer defines the power pack as an assembly, but the source does not state the valve functions or circuit diagram. Confirm directional control, lowering method, relief setting and connection requirements against the intended hydraulic schematic.
• 0.75-1.5 kW Power: The recorded power range is 0.75-1.5 kW. This narrow listed range helps frame motor selection for the proposed configuration. General engineering guidance is to calculate power from the target pressure and flow, then account for efficiency and duty cycle rather than assuming either endpoint is automatically suitable for a given platform.
• 7 MPa Listed Pressure: Pressure is described as customizable, with 7 MPa stated in the attribute data. Buyers should distinguish normal circuit pressure from the selected relief setting and any short-duration peak. Include the required values in the inquiry so the valve block and power pack can be reviewed around the actual operating demand.
• 6L Reservoir: The source specifies a 6L tank for this hydraulic power pack. Reservoir suitability depends on the usable oil requirement and the circuit's operating pattern. Compare the 6L listing with cylinder displacement, return volume, fluid temperature and mounting space before confirming that this capacity is appropriate for the target equipment.
• Customizable Structure: A customizable structure and material supplied as required are listed. These statements support a specification-led inquiry, not an unlimited design claim. Clearly identify installation orientation, available envelope, connection points and required material when seeking a proposal, and ensure the agreed configuration is documented before production or purchase.

Applications

Application wording in the source spans vehicle loading equipment and a machine-tool clamping cylinder. Suitable inquiry contexts therefore include the following documented uses, with final circuit compatibility subject to specification review:

• Vehicle tail lift hydraulic systems
• Truck rear loading platform power packs
• Machine-tool clamping cylinder circuits
• Custom hydraulic assemblies using a 6L tank

Selection Guide

For a tail-lift inquiry, provide vehicle voltage, platform load, cylinder bore and stroke, target lifting time, operating cycles and available mounting space. Compare the calculated pressure and flow with the listed 7 MPa pressure, 0.75-1.5 kW power and 1400 RPM speed. The final valve sequence should be checked against the equipment schematic because valve functions are not detailed in the source data.

For a clamping application, define clamping force, cylinder area, approach speed, hold behavior and release sequence. General engineering guidance is to verify reservoir volume, thermal conditions and electrical protection for the expected duty. Because the title and application attribute point to different use cases, place the exact application and selected configuration on the quotation and purchase documents.

Ordering Information

The MOQ is one set and the selling unit is a single item. Include intended use, required power within 0.75-1.5 kW, target pressure, 1400 RPM requirement, 6L tank, material request and valve-control needs in the inquiry. The listed six-month warranty applies to this product; buyers should obtain the applicable terms with the order documentation.

Frequently Asked Questions

Q: What is the stated use of this hydraulic power unit?

A: The title specifies vehicle tail lifts and truck rear loading platforms, while the application attribute lists a machine-tool clamping cylinder. State the intended use when requesting configuration.

Q: Does the product include a valve block?

A: The product title says it has an integrated valve block. Valve functions and the hydraulic circuit are not detailed in the source record and should be confirmed.

Q: What power and speed are listed?

A: The recorded power range is 0.75-1.5 kW, and the listed speed is 1400 RPM. Final suitability depends on the required pressure, flow and duty.

Q: How large is the tank?

A: The source lists a 6L tank. Buyers should verify usable oil volume and installation space against their specific hydraulic circuit.

Q: What are the MOQ and warranty?

A: The MOQ is one set, sold as a single item, and this product's attributes state a six-month warranty.