Horizontal 12V Stainless Steel Hydraulic Power Unit

Product Overview

The listed pressure range is customizable from 5 to 32 MPa, while the speed range is 1000-3600 RPM. Tank options are stated from 1 to 50 liters. These ranges support project discussions, but the combination should be selected against pressure, flow, duty, supply and installation envelope.

The product is offered as a single-item selling unit with a minimum order quantity of one set. Buyers should submit the intended application data before ordering so the selected pressure, tank, power and speed values can be aligned with the machine rather than inferred from the available ranges.

Technical Specifications

Key Features

• Horizontal 12V Configuration: The product title specifies a 12V hydraulic power pack system designed for horizontal installation. This combination can be evaluated for equipment layouts that call for a low-voltage DC supply and a horizontal mounting arrangement. Engineering guidance: confirm mounting clearances, cable capacity and the actual electrical interface before approving the unit for a particular machine.
• Stainless Steel Construction: Stainless steel is the material stated for this new hydraulic power unit. Material selection can affect how a pack fits its operating setting, so buyers should compare the listed construction with the fluid, cleaning practice and surrounding environment of the intended installation. No additional material grade or environmental rating is claimed in the source record.
• Customizable Pressure Range: The source attributes list customizable pressure from 5 to 32 MPa. This is a selectable range, not a statement that every configuration operates across the entire span. Specify the normal working pressure, required relief setting and peak circuit demand when requesting a quotation so the proposed configuration can be checked against the application.
• Broad Power Selection: A power range of 0.1-10 kW is recorded for the listing. This provides several potential sizing points for discussion. As general engineering guidance, motor power should be selected from required hydraulic pressure and flow, with allowance for efficiency and duty conditions; it should not be chosen solely from the maximum value shown online.
• Variable Tank Capacity: Available tank capacity is stated as 1-50L, allowing the reservoir size to be discussed around different equipment layouts. Buyers should consider usable oil volume, heat management, cylinder displacement and installation space when identifying a suitable capacity. The final tank size is part of the configuration and should be confirmed in the order specification.
• 1000-3600 RPM Range: The listed speed range is 1000-3600 RPM. Speed is one input to the proposed hydraulic output and should be considered together with pump displacement and motor selection. Provide the required flow or actuator cycle information during selection; the source does not state a single fixed flow rate for this product.

Applications

The source identifies this model as an industrial hydraulic power pack and hydraulic power unit. The following applications stay within that documented positioning or describe configuration work needed to integrate it responsibly:

• Industrial hydraulic power pack projects
• Horizontally mounted 12V hydraulic systems
• Custom-pressure hydraulic circuit integration
• Equipment requiring a selectable 1-50L reservoir

Selection Guide

Begin with the machine requirement rather than the widest available range. Record supply voltage, target working pressure, required flow, actuator volume, cycle frequency and duty pattern. Then identify an appropriate combination within the listed 0.1-10 kW power, 5-32 MPa pressure, 1000-3600 RPM speed and 1-50L tank ranges. These values must be reviewed as a system, not as independent preferences.

Also verify that horizontal installation is compatible with the available space and service access. General engineering guidance is to review reservoir orientation, suction conditions, hose routing, electrical protection and heat rejection before installation. Request a configuration confirmation when dimensions or connection details are critical, because the source record does not provide a fixed overall size or port specification.

Ordering Information

The minimum order quantity is one set, and the packaging record describes a single-item selling unit. When requesting an offer, state the required 12V configuration, working pressure, motor power, speed, tank capacity and horizontal installation constraints. Any value chosen from a customizable range should appear in the final purchase specification before the order is released.

Frequently Asked Questions

Q: Is this hydraulic power unit designed for 12V operation?

A: Yes. The product title identifies it as a 12V industrial hydraulic power pack system with horizontal installation. Confirm the complete electrical interface for the selected configuration before ordering.

Q: What pressure range is listed for this model?

A: The source lists customizable pressure from 5 to 32 MPa. The required working and relief pressures should be specified for configuration review.

Q: Which tank capacities are available?

A: The stated tank range is 1-50L. Select capacity using actuator displacement, duty pattern, available space and thermal considerations as general engineering inputs.

Q: What material is specified?

A: The source attributes identify stainless steel. No stainless grade or separate environmental rating is included in the catalog record.

Q: Can one set be ordered?

A: Yes. The recorded MOQ is one set, and the selling unit is one item. Configuration details should still be confirmed before purchase.