LIFTHYDRAU NBL2-G16 16 cc/rev Alta-Pressio Dentata Pumpa

Product Overview

Pressio declarata est 250 bar operativa et nominalis, cum pressione maxima 320 bar, aut 32 MPa. Registrum identificat duas fases, velocitatem maximam 1 500 r/min, et valorem fluxus maximalis 23,3 cm³/rev ut editus.

Pumpa mensurat 205 × 115 × 134 mm et refert portus inlet et outlet dimensiones 30 × 59 mm et 22 × 48 mm. Pondus producti est 19, et singula carto est 18 × 16 × 25 cm cum pondere brutto 23 kg.

Specificationes Technicae

Proprietates Claves

• 16 cc/rev Model Size: The title and attributes both identify 16 cc/rev, also written as 16 cm³. Actual system flow should be evaluated at the selected speed and operating condition.
• 250 Bar Rated Pressure: Operating and rated pressure are listed at 250 bar, while maximum pressure is given as 320 bar or 32 MPa. Engineers should confirm allowable continuous and peak conditions, then set system pressure protection according to the approved technical documentation for the supplied pump.
• Two-Stage Configuration: The source identifies two stages. Buyers needing a multi-stage arrangement should request details for each stage, including displacement, porting, and circuit function, because the page does not explain whether both stages share the same size or how their outputs are arranged.
• Multiple OEM References: QT33-16, QXEM3, QXP2, QXP3, QXEHX32-016, and IPH are named as replacement references. These names aid sourcing, but interchange approval still requires complete suffixes and a dimensional comparison covering rotation, shaft, flange, pilot, bolt pattern, and ports.
• Defined Installation Envelope: Overall dimensions are 205 × 115 × 134 mm, with published inlet and outlet references of 30 × 59 mm and 22 × 48 mm. Use these figures for preliminary comparison and obtain the configuration drawing before fabricating pipes, adapters, or mounting hardware.
• Inspection and Custom Marking: The source describes multiple inspections from material purchasing to finished products and accepts buyer-appointed third-party inspection. It also says a full order may carry the buyer's brand and code. Inspection plans and branding terms should be agreed before production.

Applicationes

Machinae constructionis, vehicula industrialia, et apparatus pro sanitatione environmentali sunt gruppi applicationum enumerati. Dispositio binae graduum pumpae et referentiae transversales nominatae faciunt verificationem exactam configurationis praesertim necessariam pro quolibet loco installationis destinato.

• Machinae constructionis ad interfaciem hydraulicam NBL2-G16 adaptatae
• Vehicula industrialia quae displacementem pumpae confirmatam 16 cc/rev postulant
• Apparatus pro sanitatione environmentali qui intra limites pressionis approbatos operantur
• Revisiones substitutionis QT33-16, QXEM3, QXP2, QXP3, aut QXEHX32-016
• Evaluatio substitutionis OEM IPH utendo schemate dimensionali verificato

Dux Selectionis

Confirma cur unitas binae graduum requiratur et pete technica particularia pro singulis gradibus. Nota displacementem et fluxum necessarios pro quolibet sectione circuitus, pressiones normalem et maximam, velocitatem axis, rotationem, fluidum, temperaturam, et officium. Clarifica introitum maximalis fluxus publicatum 23.3 cc/rev, quia fons exprimit illud spatium in unitatibus displacementis.

Pro opus substitutionis, compara codicem totum antiquae machinae et omnes interfaces: axem, flangiam fixationis, pilum, loca clavorum, portus et orientationem. Verifica referentias 30 × 59 mm pro introitu et 22 × 48 mm pro effluvio in schemate approbato. Non confide tantum in nominibus familiarum QT, QX aut IPH.

ANTSDR-9361: RF IC

MOQ est unum exemplar et pretium annotatum est US$225. Praebere NBL2-G16, quantitatem, exactam referentiam substitutionis, requisita graduum, rotationem, axem, fixationem, portus, velocitatem, requisita operis ad 250 bar, liquidum et petitionem de marca. Tempus expeditionis indicatum est generaliter 2–3 dies ex magazino aut 7–15 dies si non in magazino, secundum quantitatem. Confirmare programmationem, confectionem in cartonibus, garantiam unius anni, inspectionem et omnes valores technicos in factura proforma; descriptio decennalis contraria non est credenda.

Quaestiones Frequenter Rogatae

Q: Quae pressio pro NBL2-G16 indicatur?

A: Registrum producti indicat 250 bar ut pressionem operativam et nominalem, et 320 bar, sive 32 MPa, ut pressionem maximam. Conferre debes permisso continuo et apice oneris pro configuratione ordinata, et non habere pressionem maximam ut automaticam valorem continuum.

Q: Haecne est pompa dentata interna bi-stadiens?

A: Ita. Duo stadia enumerantur. Fons non publicat datos separatim de displacemente aut portibus pro singulis stadiis; ideo pete descriptionem et schemata circuitus pro singulis stadiis, ut verifices quomodo unitas supplicata congruat cum functionibus hydraulicis intentis.

Q: Quae referentiae OEM inclusae sunt?

A: Enumeratio nominat QT33-16, QXEM3, QXP2, QXP3, QXEHX32-016, et IPH. Compatibilitas confirmanda est per suffixos modulorum integros et mensuras physicarum. Simplex referentia ad familiam non sufficit ad probandam congruentiam rotationis, axis, fixationis, aut dispositionis portuum.

Q: Potestne pompa ferre brandingem ad personam?

A: Fonte dicit ordinem plenum posse portare nomen et codicem emptoris. Interroga utrum MOQ unius partis ad applicationem nominis pertineat, deinde confirma artem, locum, modum notandi, tempus ducens, et quascumque expensas antequam ordo ad productionem liberetur.

Q: Quae sunt particulae pachy enumeratae?

A: Cartonem unius partis pachy enumeratum est 18 × 16 × 25 cm cum pondere brutto 23 kg. Dimensiones producti sunt 205 × 115 × 134 mm, et pondus producti annotatum est 19. Confirma configurationem finalem et figuras mittendi antequam fretum reservetur.