LF Worm Cycloidal Gearbox Reducer, 10 HP, 10:1 Ratio

LF Worm Cycloidal Gearbox Reducer, 10 HP, 10:1 Ratio

The LF worm cycloidal gearbox reducer is listed for manufacturing plants and other industrial uses. Its source configuration combines a cycloidal gearing arrangement, worm gear type, horizontal mounting, and maximum input horsepower of 10 HP. The listing identifies a 10:1 ratio and describes a variable speed reducer. Application guidance on this page is general and does not replace configuration-specific approval.

Detailed description

Parameter

Product Overview

Published entries include input, output, and rated input speed of 3000; maximum input speed of 6000; output torque and torque of 65; and maximum torque of 195. The supplied data states no units for these speed or torque values. A separate field records a 1:05 speed ratio, which should be reconciled with the listed 10:1 ratio before ordering.

The LF-branded reducer is listed as originating in Shanghai, China, with OEM support and a one-year warranty. Unit weight is 15 kg. It is sold singly with an MOQ of one set. Package size is 18 × 18 × 32 cm and gross package weight is 23.500 kg. No price is supplied, so commercial terms require confirmation.

Technical Specifications

Parameter	Product Data
Gearing Arrangement	Cycloidal
Input Speed	3000
Output Speed	3000
Output Torque	65
Applicable Industries	Manufacturing Plant, Other
Customized Support	OEM
Gear Type	Worm
Maximum Input Horsepower	10 HP
Mounting Orientation	Horizontal
Ratio	10:1
Warranty	1 years
Weight (kg)	15
Torque	65
MAXIMUM TORQUE	195
Rated input speed	3000
Maximum input speed	6000
Minimum Order Quantity	1 set
Selling Units	Single item
Single package size	18X18X32 cm
Single gross weight	23.500 kg

Key Features

Cycloidal Arrangement with Worm Gear Type: The source identifies a cycloidal gearing arrangement and worm gear type. Buyers should match this architecture to the driven equipment, duty, and required interfaces.
10 HP Maximum Input Listing: Maximum input horsepower is 10 HP. As general guidance, also review starting conditions, load variation, operating hours, service factor, and required output.
Ratio Information for Order Verification: The main ratio is 10:1, while another field states 1:05. Specify the intended ratio and request confirmation of related speed and torque data.
Published Speed and Torque Entries: Rated input speed is 3000, maximum input speed is 6000, torque is 65, and maximum torque is 195. Verify units and rating basis.
Horizontal Mounting Orientation: Horizontal mounting is listed. As general installation guidance, confirm shaft alignment, support, fastening, clearances, and the approved mounting position for the selected unit.
OEM Support and Single-Set MOQ: OEM support and an MOQ of one set are listed. Because customization scope is undefined, include required interfaces and operating conditions in the inquiry.

Applications

The listing names manufacturing plants and other industries. These are selection contexts, not guaranteed uses. Check the actual load, speed, duty, mounting, environment, and interfaces before purchase.

Manufacturing equipment requiring a horizontally mounted reducer, subject to application review.
Industrial drive assemblies evaluated around the listed 10 HP maximum input.
Variable-speed reducer projects where the required ratio is confirmed before ordering.
OEM machinery builds needing a worm-type, cycloidal-arrangement reducer option.
Replacement projects where dimensions, shafts, ratio, speed, and torque are verified.

Selection Guide

As general reducer-sizing guidance, begin with motor power and actual input speed, then determine the required output speed and output torque from the machine load. Apply an appropriate service factor for starts, stops, shock, reversals, daily running time, and load variation. Compare those requirements with configuration-specific ratings rather than relying only on the 10 HP headline value.

As general lubrication and installation guidance, follow the lubricant type, fill quantity, inspection interval, mounting-position rules, and commissioning procedure supplied for the confirmed model. Check alignment and fastening before operation and avoid mixing lubricants unless expressly permitted. These are general practices; the source catalog does not provide model-specific lubricant data.

Ordering Information

Order by product ID 1601011508202 and state the required ratio, motor power, input speed, target output speed, required torque, duty cycle, mounting orientation, shaft or flange interfaces, and OEM needs. Ask for written confirmation of units for the listed speed and torque figures and clarification of the 10:1 versus 1:05 ratio entries. MOQ is one set; price is not supplied.

Frequently Asked Questions

Q: What gearing and gear type are listed for this reducer?

A: The source lists a cycloidal gearing arrangement and a worm gear type. It also describes horizontal mounting. Any required connection details or dimensional compatibility should be confirmed for the final configuration.

Q: What ratio is shown in the product data?

A: The main ratio attribute is 10:1. A separate field records 1:05 as the speed ratio. Because these entries differ, buyers should state the required ratio and request configuration-specific confirmation before ordering.

Q: What are the listed speed and torque values?

A: Input speed, output speed, and rated input speed are each listed as 3000; maximum input speed is 6000. Output torque and torque are listed as 65, and maximum torque as 195. The supplied data does not specify units.

Q: Does the listing support OEM orders?

A: Yes. Customized support is listed as OEM. The source does not define available modifications, so requested mounting, shaft, interface, ratio, and operating requirements should be documented for review.

Q: What are the MOQ and package details?

A: The MOQ is one set, sold as a single item. The single-package size is 18 × 18 × 32 cm, with a listed gross weight of 23.500 kg. The unit weight is listed separately as 15 kg.